Bailey Infi 90 IMAOM01 Instructions Manual
Text of the manual
Process Control and
Automation Solutions
from Elsag Bailey Group
E96-206
Analog Output Module
(IMAOM01)
WARNING notices as used in this instruction apply to hazards or unsafe practices that could result in
personal injury or death.
CAUTION notices apply to hazards or unsafe practices that could result in property damage.
NOTES highlight procedures and contain information that assists the operator in understanding the
information contained in this instruction.
The Analog Output Module (IMAOM01) generates eight analog
signals, and outputs these signals from the INFI 90 Process
Management System to a process. A master module configura-
tion determines the output values. These outputs control pro-
cess field devices.
This instruction explains the module features, specifications
and operation. It de
List of Effective Pages
Total number of pages in this instruction is 41, consisting of the following:
Page No.
Change Date
Preface
Original
List of Effective Pages
Original
iii through vi
Original
1-1 through 1-7
Original
2-1 through 2-7
Original
3-1 through 3-6
Original
4-1 through 4-2
Original
5-1 through 5-4
Original
6-1
Original
7-1
Origina
Sommaire de Securite
GENERAL
WARNINGS
Equipment Environment
All components, whether in transportation, operation or storage
must be in a noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to ensure that contact with
energized parts is avoided when servicing.
Special Handl
Table of Contents
Page
I-E96-206A
iii
SECTION 1 - INTRODUCTION....................................................................................................1-1
OVERVIEW ..................................................................................................................1-1
INTENDED USER......................................................
Table of Contents (continued)
Page
®
SECTION 4 - OPERATING PROCEDURES................................................................................4-1
INTRODUCTION .......................................................................................................... 4-1
MODULE STATUS INDICATOR ...........................................
List of Figures
No.
Title
Page
I-E96-206A
v
1-1.
INFI 90 Communication Levels...............................................................................1-1
2-1.
Analog Output Module Block Diagram ...................................................................2-1
2-2.
Analog Output Circuit...............................................................
1 - 1
SECTION 1 - INTRODUCTION
OVERVIEW
The Analog Output Module (IMAOM01) is a microprocessor
based INFI 90 module that generates eight individual analog
output signals used to control a process. It develops these sig-
nals using data received from other INFI 90 devices. Algorithms
performed in a master module determine the Analog Output
1 - 2
I-E96-206A
®
INTENDED USER
System engineers and technicians should read this manual
before installing and operating the AOM. A module should NOT
be put into operation until this instruction is read and under-
stood. Refer to the Table of Contents to find specific informa-
tion after the module is operating.
MODULE DESCRIPTI